GreenWorks MO40B411 Lawn Mower Manual

The GreenWorks MO40B411 is a 40V cordless lawn mower designed for efficient grass cutting with a 20-inch steel deck. It features a brushless motor for enhanced performance and durability, a 5-position height adjustment for customizable cutting heights, and a foldable design for easy storage. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 20-inch steel deck, brushless motor, 5-position height adjustment, foldable design, and 40V battery compatibility.

FeatureDescription
Brushless MotorProvides longer run time and increased efficiency.
20-Inch Cutting DeckOffers a wide cutting path for faster mowing.
5-Position Height AdjustmentAllows for customizable cutting heights from 1-3/4" to 3-3/4".
Foldable DesignFacilitates easy storage and transport.
40V BatteryCompatible with other GreenWorks 40V tools for convenience.

Installation

Unpack the mower and check for all components. Ensure the battery is charged before first use.

  1. Attach the handle: Align and secure the handle to the mower body.
  2. Check battery: Ensure the battery is fully charged and properly inserted.
  3. Inspect mower: Check for any visible damage before operation.

WARNING! Always wear appropriate safety gear when operating the mower.

First-Time Setup

Power on the mower; follow the instructions for initial setup.

  1. Charge the battery: Plug the charger into a power outlet and connect to the battery.
  2. Install the grass bag: Attach the grass collection bag to the rear of the mower.
  3. Adjust cutting height: Set the desired height using the height adjustment lever.

CAUTION! Ensure the mower is on a flat surface during setup.

Specifications

Controls and Settings

Access controls via the handle: Power switch, height adjustment lever, and safety key.

Safety Key: Must be inserted to operate the mower.

Height Adjustment: Use the lever to set the desired cutting height.

Connecting Devices

Battery: Ensure the battery is properly connected before use.

  1. Turn off the mower before connecting or disconnecting the battery.
  2. Ensure the battery is fully charged for optimal performance.

Tip: Store the battery in a cool, dry place when not in use.

Operating the Mower

Follow these steps for safe operation:

  1. Power on the mower using the safety key.
  2. Adjust the height as needed before starting.
  3. Begin mowing by pushing the mower forward.
  4. Stop the mower by releasing the power switch.

WARNING! Keep hands and feet away from the cutting area while operating.

Maintenance

Regular maintenance is essential for optimal performance.

  1. Clean the mower after each use: Remove grass clippings and debris.
  2. Check the blade: Sharpen or replace as needed.
  3. Inspect the battery: Ensure terminals are clean and free of corrosion.

CAUTION! Always disconnect the battery before performing maintenance.

Safety Information

Read all safety instructions before operating the mower. Always wear protective gear and keep children and pets away from the mowing area.

Troubleshooting

SymptomPossible CauseCorrective Action
Mower won't startBattery not chargedCharge the battery and try again.
Uneven cuttingHeight adjustmentCheck and adjust the cutting height.
Grass clippings not collectedBag fullEmpty the grass collection bag.
Excessive vibrationLoose partsInspect and tighten any loose components.

Service: For assistance, contact GreenWorks customer support.

GreenWorks MO40B411 Lawn Mower Manual © - All Rights Reserved 2026