GreenWorks LMC40006 Lawn Mower Manual

The GreenWorks LMC40006 is a powerful cordless lawn mower designed for efficient grass cutting with a 40V battery system. It features a 20-inch cutting deck, adjustable cutting heights, and a lightweight design for easy maneuverability. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 20-inch cutting deck, 40V battery, adjustable cutting heights, lightweight design, and foldable handle for easy storage.

FeatureDescription
20-inch Cutting DeckWide cutting area for efficient mowing
40V BatteryPowerful battery for extended runtime
Adjustable Cutting HeightsMultiple height settings for different grass lengths
Lightweight DesignEasy to maneuver and transport
Foldable HandleConvenient storage and transport

Installation

Unpack and inspect contents. Assemble the mower according to the instructions provided.

  1. Attach the handle to the mower body.
  2. Insert the battery into the battery compartment.
  3. Ensure all screws and bolts are tightened.
  4. Charge the battery fully before first use.

WARNING! Always wear appropriate safety gear when handling the mower.

First-Time Setup

Power on the mower; follow the setup instructions.

  1. Set the desired cutting height using the height adjustment lever.
  2. Ensure the battery is charged and properly installed.
  3. Perform a test run on a small area of grass.

CAUTION! Ensure the area is clear of obstacles before mowing.

Specifications

Controls and Settings

Access the controls via the handle. The mower features a safety switch and throttle control for easy operation.

Controls: Safety switch, throttle control, height adjustment lever.

Connecting Devices

No external devices are required for operation.

  1. Ensure the battery is charged and installed.
  2. Power on the mower using the safety switch.

Tip: Always check the battery level before starting.

Operating the Mower

Follow these steps to operate the mower effectively.

  1. Power on the mower using the safety switch.
  2. Adjust the cutting height as needed.
  3. Start mowing by pushing the mower forward.
  4. Stop the mower by releasing the throttle control.

WARNING! Do not operate on wet grass or uneven terrain.

Maintenance

Regular maintenance is essential for optimal performance.

  1. Clean the mower after each use.
  2. Check the battery for damage and charge regularly.
  3. Inspect the blades for sharpness and replace if necessary.

CAUTION! Always disconnect the battery before performing maintenance.

Safety Information

Read all safety instructions before operating the mower.

Troubleshooting

SymptomPossible CauseCorrective Action
Mower won't startBattery not chargedCharge the battery fully before use.
Uneven cutIncorrect cutting heightAdjust the cutting height to the desired level.
Battery drains quicklyOld batteryReplace the battery if it no longer holds a charge.
Strange noisesDebris in bladesInspect and clean the blades thoroughly.

Reset: If issues persist, consult customer support.

Service: For assistance, contact GreenWorks customer service.

GreenWorks LMC40006 Lawn Mower Manual © - All Rights Reserved 2026