GreenWorks LM1402 Lawn Mower Manual

The GreenWorks LM1402 is a 14-inch cordless electric lawn mower designed for efficient grass cutting with minimal environmental impact. It features a powerful 40V battery, adjustable cutting heights, and a lightweight design for easy maneuverability. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 14-inch cutting deck, 40V lithium-ion battery, adjustable height settings, and foldable design for easy storage.

FeatureDescription
14-inch Cutting DeckCompact size for easy maneuverability in tight spaces.
40V Lithium-Ion BatteryProvides sufficient power for up to 45 minutes of runtime.
Adjustable Cutting HeightsAllows for customization of grass length with multiple height settings.
Lightweight DesignEasy to push and maneuver around the yard.
Foldable HandleFor convenient storage and transport.

Installation

Unpack the mower and check all components. Ensure the battery is fully charged before first use.

  1. Attach the handle: Align and secure the handle to the mower body.
  2. Insert the battery: Ensure the battery is properly seated in the compartment.
  3. Check safety features: Ensure the safety key is in place before operating.

WARNING! Always wear appropriate safety gear when operating the mower.

First-Time Setup

Power on the mower and familiarize yourself with the controls.

  1. Charge the battery: Connect the charger and allow the battery to fully charge.
  2. Adjust the cutting height: Set the desired height using the adjustment lever.
  3. Test the mower: Start the mower in an open area to ensure proper operation.

CAUTION! Ensure the area is clear of obstacles before mowing.

Specifications

Controls and Settings

Access the mower controls via the handle. Key controls include the power switch, safety key, and height adjustment lever.

Power Switch: Located on the handle for easy access.

Safety Key: Must be inserted for the mower to operate.

Connecting Devices

Battery charging: Use the provided charger to connect the battery to a power outlet.

  1. Ensure the charger is unplugged before connecting the battery.
  2. Align the battery with the charger and secure it in place.
  3. Plug the charger into a power outlet and monitor the charging status.

Tip: Always charge the battery indoors in a dry location.

Operating the Mower

Follow these steps to operate the mower safely and effectively.

  1. Start the mower: Insert the safety key and press the power switch.
  2. Adjust the speed: Use the throttle control for desired speed.
  3. Cut the grass: Move the mower in straight lines for even cutting.
  4. Stop the mower: Release the power switch to turn off the mower.

WARNING! Do not operate the mower on wet grass.

Maintenance

Regular maintenance is essential for optimal performance.

  1. Clean the mower after each use: Remove grass clippings and debris.
  2. Check the battery: Ensure it is charged and free of damage.
  3. Inspect the blades: Sharpen or replace blades as needed.

CAUTION! Always disconnect the battery before performing maintenance.

Safety Information

Read all safety instructions before operating the mower. Always wear protective gear and keep children and pets away from the mowing area.

Troubleshooting

SymptomPossible CauseCorrective Action
Mower does not startBattery not chargedCharge the battery and try again.
Uneven cuttingBlades dullSharpen or replace the blades.
Battery drains quicklyOld batteryReplace the battery if it no longer holds a charge.
Mower vibrates excessivelyLoose partsCheck and tighten all screws and bolts.

Service: For assistance, contact GreenWorks customer support.

GreenWorks LM1402 Lawn Mower Manual © - All Rights Reserved 2026