GreenWorks 25157 Lawn Mower Manual

The GreenWorks 25157 is a powerful 20-inch electric lawn mower designed for efficient grass cutting with minimal environmental impact. It features a 12-amp motor, adjustable cutting heights, and a lightweight design for easy maneuverability. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 20-inch cutting deck, 12-amp motor, adjustable cutting heights, foldable handle, and rear bagging capability.

Installation

Unpack and inspect contents. Assemble the mower according to the instructions provided.

1. Attach the handle: Align and secure the handle to the mower body.
2. Install the grass bag: Attach the grass collection bag to the rear of the mower.
3. Check the power cord: Ensure the power cord is in good condition before use.
4. Plug into a power outlet: Connect to a suitable power source.

WARNING! Always ensure the mower is unplugged when performing maintenance or adjustments.

First-Time Setup

Before using the mower, ensure all parts are securely assembled and check the cutting height settings.

1. Adjust the cutting height: Use the lever to set the desired grass length.
2. Test the mower: Plug in and run the mower briefly to ensure it operates correctly.
3. Familiarize with controls: Understand the operation of the power switch and safety features.

CAUTION! Always wear appropriate safety gear when operating the mower.

Specifications

• Motor: 12-amp electric motor.
• Cutting Width: 20 inches.
• Cutting Heights: 1 inch to 3 inches (adjustable).
• Weight: Approximately 56 lbs.
• Power Source: Electric (requires extension cord).
• Grass Bag Capacity: 16 gallons.
• Warranty: 4 years limited warranty.

Controls and Settings

Access the power switch and cutting height adjustment lever located on the mower handle.

Safety Features: The mower is equipped with a safety switch that prevents operation when not engaged properly.

Connecting Devices

Ensure the mower is connected to a suitable power source using an appropriate extension cord.

1. Choose a heavy-duty extension cord rated for outdoor use.
2. Connect the extension cord to the mower and plug it into an outlet.
3. Ensure the cord is not in the mowing path to avoid accidents.

Tip: Always check the cord for damage before use.

Operating the Mower

Follow these steps to operate the mower effectively:

1. Start the mower: Engage the safety switch and press the power button.
2. Mow the lawn: Move the mower in straight lines, overlapping slightly with each pass.
3. Adjust speed as necessary: Maintain a steady pace for optimal cutting.
4. Stop the mower: Release the safety switch to turn off the mower.

WARNING! Do not attempt to clear clogs while the mower is plugged in.

Maintenance

Regular maintenance is essential for optimal performance.

1. Clean the mower after each use: Remove grass clippings and debris.
2. Check the blade: Inspect for sharpness and damage; sharpen or replace as needed.
3. Store properly: Keep the mower in a dry place, away from moisture.

CAUTION! Always unplug the mower before performing maintenance.

Safety Information

Read all safety instructions before operating the mower. Always wear protective gear, including gloves and safety glasses.

Troubleshooting

Reset: If issues persist, consult the manual or contact customer support.