GreenWorks 25137 Lawn Mower Manual

The GreenWorks 25137 is a powerful electric lawn mower designed for efficient grass cutting. It features a 12-amp motor, a 20-inch cutting deck, and a 7-position height adjustment for customizable cutting heights. The mower is lightweight, easy to maneuver, and equipped with a foldable handle for compact storage. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 12-amp motor, 20-inch cutting deck, 7-position height adjustment, foldable handle, and rear bagging capability.

Feature	Description
12-Amp Motor	Powerful motor for efficient cutting
20-Inch Cutting Deck	Wide cutting path for faster mowing
7-Position Height Adjustment	Customize cutting height from 1-3/4" to 3-3/4"
Foldable Handle	Easy storage and transport
Rear Bagging Capability	Collects grass clippings for a clean lawn

Installation

Unpack the mower and check contents. Assemble the handle and attach the grass bag.

Attach the handle: Align and secure with provided screws.
Install the grass bag: Hook onto the rear of the mower.
Check the power cord: Ensure it is free from damage.
Plug into a grounded outlet.

WARNING! Always ensure the mower is unplugged before performing maintenance.

First-Time Setup

Before using the mower, familiarize yourself with the controls and safety features.

Read the user manual thoroughly.
Check the oil level if applicable.
Ensure the cutting height is set to your preference.
Perform a test run in a small area.

CAUTION! Always wear appropriate safety gear while operating the mower.

Specifications

Motor: 12-amp electric.
Cutting Deck: 20 inches.
Height Adjustment: 7 positions (1-3/4" to 3-3/4").
Weight: Approximately 56 lbs.
Power Source: Electric, requires a grounded outlet.
Grass Bag Capacity: 16 gallons.

Controls and Settings

Access controls via the handle: Power switch, height adjustment lever, and safety key.

Safety Key: Must be inserted to operate the mower.

Height Adjustment: Adjust the lever to set desired cutting height.

Connecting Devices

Ensure the mower is connected to a suitable power source before operation.

Check the power cord for any damage.
Plug into a grounded outlet.
Ensure the extension cord is rated for outdoor use if needed.

Tip: Avoid using multiple extension cords to prevent voltage drop.

Operating the Mower

Follow these steps to operate the mower safely and effectively.

Ensure the area is clear of debris and obstacles.
Start the mower by inserting the safety key and pressing the power switch.
Adjust the height as needed during operation.
After mowing, turn off the mower and unplug it.

WARNING! Never leave the mower unattended while plugged in.

Maintenance

Regular maintenance ensures optimal performance of your mower.

Clean the cutting deck after each use.
Check and replace the blade as needed.
Inspect the power cord for wear and tear.
Store in a dry place when not in use.

CAUTION! Always disconnect the power before performing maintenance.

Safety Information

Read all safety instructions before operating the mower.

Keep hands and feet away from the cutting area.
Do not operate in wet conditions.
Always wear safety goggles and sturdy footwear.
Do not bypass safety features.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower won't start	Power cord disconnected	Check power connection and safety key.
Uneven cutting	Incorrect height setting	Adjust height to desired level.
Excessive vibration	Dull blade	Sharpen or replace the blade.
Grass clippings not bagging	Full grass bag	Empty the grass bag and check for blockages.

Reset: If issues persist, consult customer support.

Service: For assistance, contact GreenWorks customer service.